Buying or moving into a new-build home is exciting. Everything feels fresh, modern, and untouched. But even in brand-new buildings, plumbing problems can happen. In fact, many homeowners are surprised to find water-related issues soon after moving in. While enjoying your first days in a new home or relaxing with some fun at Woo Casino, you might not expect your pipes to cause trouble—but being aware of these common issues can save you time, money, and stress.
1. Leaking Pipes and Fixtures
Leaking is one of the most common plumbing issues in new-build homes. While it might seem strange for new materials to leak, poor installation is often the cause. Sometimes plumbers rush through jobs, or connections aren’t tightened properly. Even small leaks can lead to water damage behind walls or under floors if not caught early.
What to do: Always check under sinks, behind toilets, and near the water heater for signs of moisture. If you notice a drip or dampness, contact your builder right away.
2. Low Water Pressure
Low water pressure can be annoying, especially when you’re trying to shower or do the dishes. In new buildings, this may be due to improperly installed pipes, debris in the plumbing system, or even issues with the water main connection.
What to do: Report any water pressure issues to the building management or contractor. A plumber can test the water pressure and find the cause quickly.
3. Clogged Drains
You might not expect clogged drains in a brand-new home, but it happens. Construction debris like plaster, dust, or small building materials can end up in drains during the build process. Over time, these can cause blockages.
What to do: If you notice water draining slowly from sinks or bathtubs, try using a natural drain cleaner or call a plumber. Don’t ignore the problem—it can get worse.
4. Noisy Pipes
New homeowners often report strange banging or tapping sounds coming from their plumbing. This is known as “water hammer” and usually happens when a valve shuts off quickly. Poorly secured pipes can also cause noise as water flows through.
What to do: These noises are usually harmless but annoying. A plumber can install water hammer arrestors or better secure loose pipes to solve the problem.
5. Running Toilets
A constantly running toilet wastes water and can increase your water bill. In new homes, this is often due to poorly adjusted or faulty parts inside the toilet tank.
What to do: If your toilet runs for long periods after flushing, lift the tank lid and check if the flapper is sealing properly or if the float needs adjustment. If unsure, call a plumber for help.
6. Incorrect Pipe Slope
Drain pipes need to be installed at the correct angle so water and waste flow away properly. In new builds, pipes that are too flat or too steep can cause slow drainage or backups.
What to do: This issue usually requires a professional inspection. If you notice repeated clogs or strange smells, it might be due to poor pipe slope.
7. Water Heater Issues
Sometimes, water heaters in new homes are not set up correctly. You might find that you run out of hot water too quickly or that the temperature is inconsistent. Installation errors or wrong settings are usually to blame.
What to do: Check the temperature setting on your water heater. If the issue continues, have a licensed technician take a look.
8. Faulty Shut-Off Valves
Shut-off valves are essential in case of a plumbing emergency. Unfortunately, in new homes, they may be missing, hard to access, or not working properly.
What to do: Locate and test your shut-off valves early on. Make sure they work, and ask your builder for help if you can’t find or operate them.
